Mining in Manitoba |
Nitromon Explosives |
Mining Systems |
||
|
An important advance in explosives technology was the development by du Pont in 1934 of Nitramon, a canned product with a typical formula of 92 percent ammonium nitrate, 4 percent dinitrotoluene, and 4 percent paraffin wax. Some grades contain metallic ingredients such as aluminum and ferrosilicon. Nitramon is insensitive to the action of a line of detonating cord, a commercial blasting cap, shock and friction, or the impact of small-calibre ammunition. A large primer is required for its detonation, and the one normally used is known as a Nitramon primer. This is also a canned product with Nitramon at each end but a centre section of amatol that can be detonated by either detonating cord or a blasting cap. The cans are provided in varying sizes. A minimum diameter of 10 centimetres (4 inches) for regular Nitramon is necessary to ensure proper explosive effect if individual cans in a column become separated by some material such as a rock. Special grades are made for use in seismic exploration for gas and oil in 5- and 6.4-centimetre (2- and 21/2-inch) diameters. In this case, however, the cans are threaded and intimate contact is assured because the column is screwed together. Nitramex is similar to Nitramon but is much stronger because it contains TNT and a metallic ingredient such as aluminum. Both it and Nitramon have been largely replaced by the water gels, which are described later.
|
Black Powder
Liquid Oxygen
|