Mining in Manitoba |
Nitrocellulosic Explosives |
Mining Systems |
||
|
When Christian Schoenbein invented nitrocotton (guncotton) in 1845 by dipping cotton in a mixture of nitric and sulfuric acids and then removing the acids by washing with water, he hoped to obtain a propellant for military weapons. It proved, however, to be too fast and violent. About 1860 Major E. Schultze of the Prussian army produced a useful nitrocellulosic propellant. He nitrated small pieces of wood by placing them in nitric acid and then, after removing the acid, impregnated the pieces with barium and potassium nitrates. The purpose of the latter was to provide oxygen to burn the incompletely nitrated wood. Schultze's powder was highly successful in shotguns but was too fast for cannon or even most rifles. In 1884 a French chemist, Paul Vieille, made the first smokeless powder as it is now known. He partially dissolved nitrocellulose in a mixture of ether and alcohol until it became a gelatinous mass, which he rolled into sheets and then cut into flakes. When the solvent evaporated, it left a hard, dense material resembling horn. This product gave satisfactory results in all types of guns. In 1887 Nobel introduced another of his revolutionary inventions, which he called Ballistite. He mixed 40 percent of a lower nitrogen content, more soluble nitrocellulose, and 60 percent of nitroglycerin. Cut into flakes, this made an excellent propellant, and it continued in use for over 75 years. The British refused to recognize Nobel's patent and developed a number of similar products under the generic name cordite. The progress of smokeless powder in the United States was much slower than it was in Europe. Long-continued work, principally by E.I. du Pont de Nemours & Company, finally resulted in a material that was excellent for guns of all types and sizes. It was first marketed about 1909 and was the most important type of smokeless powder used by the Allies in World War I. It was made from a nitrocotton of relatively low nitrogen content, called pyrocellulose, because that type is quite soluble in ether-alcohol. A small amount of diphenylamine was used as a stabilizer and, after forming the grains and removing the liquid, a coating of graphite was added. The smokeless powder most widely used in the United States at the present time is much the same. Other popular types are mostly double-base and may contain from about 20 to 35 percent nitroglycerin. Cotton linters for nitration have been almost, if not entirely, replaced by purified wood cellulose.
|
Black Powder
Liquid Oxygen
|